2-1 Cans Filling and Seaming Machine for Beverage

2-1 Cans Filling and Seaming Machine for Beverage

This equipment is suited for the filling and seaming of carbonated soft beverages, beer, and so on. The generation ability is 50-two hundred cans for each moment.
 
The complete equipment can be divided into two positions, filling and seaming, filling is utilised for stress filling, liquid degree is controlled by liquid stage filling basic principle, and the materials temperature is ideal for minimal-temperature filling. The seal adopts a double – wheel progressive seal.
 

 
The principles:
After the vacant cans move the conveyor and divided by enter-in cans screw,by the enter-in dialing plate driving enter into the cans-help seat,then the cans-assist rise and transfer to the switch valve place, and make the very first exhaust,and the cans-support seat keep on to rise to the filling valve seal.And near the gas-manual pipe immediately,open the exhaust near,make the next exhaust then close the exhaust switch right away.The filling barrel continue rotating a certain angle to the 2nd change valve place, totally open the filling valve,the material stream into the cans until finally full.
 
Soon after the filling procedure, the filling barrel ratates to the exhaust valve and remove surplus stress, the cans-support plate goes down to break the cans away from the filling valve.And then the cans will be despatched to the cap falling-down unit by the hook chain. Soon after the cap falling-down device detect the cans, it falls cap down, and deliver the can to the seaming equipment. Then the cans supported by the plate and are sealed. Lastly it is delivered by the conveyor.
 
 
The Characteristics:
one.The sealing device head seal uses the biaxial framework: the feed amount of the first and next roller can be altered and controlled individually.
 
two.The secondary exhaust construction of the filling equipment: the 2nd exhaust of the filling machine, lessen the oxygen articles in the tank and prolong the shelf life
 
3.Heavy bearing commonly utilized in this machine the imported bearings are used in the important large loading spot so that the support life and balance can be prolonged.
 
four.Substantial quality factors: We use Siemens PLC, daida inverter, contact monitor, Yad solenoid valve and Omron proximity switch.
 
five.Handy Operation: The production velocity can be adjusted on contact display The equipment will immediately alarm when standard malfunctions occurs, and will also give the corresponding causes. In accordance to the severity of the malfunctions, PLC will judge whether to quit the device.
 6.The equipment has excellent visual appeal, stable operation and low sound. It is the most excellent filling and seaming gear in China at current.

 

2-1 Cans Filling and Seaming Machine for Beverage